To simplify the task of entering job information on field logs, you can link employees to equipment. When linked, you can enter hours for one (either employee or equipment) and have the field log copy those hours to the other. There are three parts to using this feature:

  • Configuring field log settings for the business unit associated with the field log.
  • Linking employees and equipment on field logs.
  • Entering equipment or employee hours.

Configuring Track Settings

In the Setup area, configure the Track Settings for the Business Unit associated with a field log. To link Employees and Equipment, one or both of the Linked Employees or Linked Equipment columns must be available.

About adding Linked Employees or Linked Equipment columns
  1. Select Business Units from Settings and edit the Business Unit you want to configure.
  2. Select the Track Settings tab and click Edit Track Settings.
  3. Note: If this is a child business unit, you need to clear the Use Parent Business Unit Track Settings check box. When this check box is selected, you cannot edit the settings on this tab.

  4. Do one or both of the following:
    • Go to the Employees area in the Field Log section, click Add Employee Columns and select Linked Equipment.
    • Go to the Equipment area in the Field Log section, click Add Equipment Columns and select Linked Employee.
  5. Save your changed settings.

Creating Employee/Equipment Links on a Field Log

On Field Logs, use the Linked Employees and Linked Equipment columns to link Employees and Equipment.

About the Linked Equipment column

The Linked Equipment column appears in the Employees area of a Field Log. When you edit a Field Log, this column displays a drop-down list of all equipment included on the field log. This list is repeated for each employee.

  • Use the drop-down list to link a piece of equipment with an employee.
  • You can only assign one piece of equipment to an employee.
  • If you need to assign an employee to more than one piece of equipment, click Add Employees and add that employee again. Each additional listing of an employee is numbered. For example, if you list employee John Doe three times, his name will be listed as follows:

    John Doe
    John Doe (2)
    John Doe (3)

About the Linked Employee column

The Linked Employee column appears in the Equipment area of a Field Log. When you edit a Field Log, this column displays a drop-down list of all employees included on the field log. This list is repeated for each piece of equipment.

  • Use the drop-down list to link employees to a piece of equipment.
    • Select the check box next to an employee's name to assign that employee to the equipment.
  • You can assign more than one employee to a piece of equipment.
    • Select check boxes next to the employee names for each employee you want to assign to the equipment.

Entering Hours for Linked Employees and Equipment

When you set up an Employee/Equipment link, the Copy Hours button becomes available.

  • In the Employees area, clicking Copy Hours copies the recorded hours to the appropriate piece of equipment in the Equipment area.
  • In the Equipment area, clicking Copy Hours copies the recorded hours to the appropriate employee in the Employee area.
  • When you click Copy Hours, the Confirm Copy dialog appears. Click Copy to complete the operation or No to cancel it.
More about the Copy Hours button

There are two ways to copy hours:

  • To copy hours one at a time, click Copy Hours next to an item in either the Linked Equipment column or the Linked Employee column.
  • To copy multiple hours, use the check boxes in the first column on the left in either the Employees or Equipment area.
    • When you select a check box, the Copy Hours button in the title bar of either area becomes active.
    • Select the hours you want to copy, then click Copy Hours.
    • To select all items in either area, select the check box in the column header.