Skip to main content

Work with profiles and sections in AutoCAD/Civil 3D (Geosuite Next Gen)

Modified: 4 Nov 2026 Geosuite Help

The Profile tool group in AutoCAD/Civil 3D provides tools to manipulate geotechnical sounding plots and project digital elevation surfaces into longitudinal profiles and cross sections.

Draw surfaces into profiles

Use Draw surface to project AutoCAD/Civil 3D TIN surfaces or Trimble Quadri surface models onto existing profile and section views, such as ground surfaces, rock outcrop models, or design subgrades.

  1. Ensure that you have an active presentation open in model space (for example, a longitudinal profile or cross section set).
  2. In the Geosuite ribbon of AutoCAD/Civil 3D, in the Profile tool group, click Draw surface.
  3. In the dialog that appears, select the surface source:
    • Civil 3D Surface: Select an existing TIN surface from any open drawing in AutoCAD or Civil 3D.

    • Quadri Surface: Select a surface model directly from an active Trimble Quadri project connection.

  4. Click OK.
The terrain surface line is immediately computed along the cutting plane and drawn across your active sections and profiles.

Modify sounding protocols

Use the Move protocol and Mirror protocol tools in AutoCAD/Civil 3D to modify sounding protocols.

Select one of the following:

  • Move protocol: Shifts a borehole's sounding protocol plot laterally along the profile plane for clearer readability when boreholes overlap or cluster tightly.
  • Mirror protocol: Flips the sounding plot orientation horizontally across its vertical axis to avoid clashing with other visuals.
Submit

Table of Contents