How to choose, download, and set path for the Novapoint Product Library.
This is relevant for first time use and when a new update of the Product Library is released.
See Download Product Library Does Not Work if the download does not work.
Choose Library
Step 1: Choose the desired Product Library. In the Novapoint ribbon, you can activate desired Product Library by clicking on the downward pointing arrow in the Product Library panel.
Step 2: Change to other libraries by repeating the process.
Download Product Libraries
Step 1: In the Novapoint ribbon, navigate to the Product Library tab. In the menu, choose Download product libraries.
Step 2: A new window will appear. Here you can choose between products from suppliers and/or products from municipalities.
Step 3: The Product Library will be downloaded as a .zip folder. Save and extract to desired destination.
Set path to the Product Library
Step 1: In the Novapoint ribbon, navigate to the product library tab. In the menu, choose Set path.
Step 2: Navigate to the extracted folder containing the Product Library. Click Set path text document and Open to define path.
About municipal libraries
Some municipalities have uploaded a selection of completed models. You can change between the municipal libraries and the supplier library as you wish. This can be done by changing the path.
Important to know:
-
Municipal libraries contain several assemblies. The models are big, so give the program some time to load products.
-
This is sample drawings and are not to be used for further drawing or to generate bill of materials (BOM).
-
The meaning with these drawings is to better visualize desired solution/standardization.
-
Reservations are made if there are any geometrical or project errors. Contact the municipality for any questions or clarifications.
-
It is referred to local water and sewer norms and other rules/standards.
-
If you are experiencing lag, make sure your computer fulfils the minimum requirements and uses the correct graphic card.