Skip to main content

Bulk edit drawings

Modified: 17 Nov 2026 ProjectSight Project Management Help

You can edit multiple drawings at the same time.

  1. In the Drawings module, select the drawings.
    1. To switch to the Select mode, select the checkbox for a drawing.
    2. To choose more drawings, select each one.

      Or, to choose all the drawings, select the checkbox on the toolbar.

      Tip:

      To choose consecutive drawings in the list view, select a drawing, and then press Shift and select another drawing in the list.

      Figure 1. Selecting multiple drawings using Shift+Click
  2. On the navigation toolbar, select (Edit).
  3. To maximize the editing area in the dialog, select (Maximize).
  4. In the Edit properties dialog, edit the drawing information.
    • To add today's date in a Rev. date cell, select the cell, and then press Ctrl+D. The date is updated after you navigate away from the cell.
    • To copy values down the Rev. date column, select the cell with the date to copy, press Esc so that it's not highlighted, and then press Ctrl+Down arrow.
    • To copy values down from columns with dropdown lists, make sure that the cell is selected but the dropdown list is closed, and then press Ctrl+Down arrow.
    • To undo a change while the cell is selected, press Esc.
    Note: The revision number must be unique in the drawing series.
  5. Select Save.
Submit

Table of Contents