Import a reference alignment into your project for viewing and report generation.
- On the Insert tab, click Import Reference Alignment.
The Import Reference Alignment dialog appears.
- In Alignment file, browse for the alignment source file.
- In Import alignment as, enter the name for the imported alignment file.
- Click OK.
After the alignment has been found, the Alignment Import dialog appears.
- Select the alignment to be used as the reference alignment from the alignments found in the LandXML.
- Click Next.
- Choose the cross sections used to generate the earthwork volumes.
- You can import the location of Bridges, Tunnels, and Walls using data in the formats of:
-
XLS
-
Comma or Tab text files
Define the format for the file:
-
Name: Name to be assigned to the structure after import
-
Station: The start location along the alignment
-
Length: Length of the overall structure
-
Type: The type of structure to be created. If a structure type is not found or does not match an existing structure in Quantm a warning will appear prompting the user. The alignment cannot be imported if this occurs. The user has to exit the import and generate a matching entity in the cost parameters.
-
- Using the browse button, navigate to the file to define the bridge, tunnel, wall and culvert locations.
For XLS, the following can be defined:
-
Sheet data is contained: Use the drop-down menu to select the sheet.
-
Header row: Select if there is no header row present in the file. If there is a header in the file, the header titles will be assigned to the tabs in the data display table.
For text files, the following can be defined:
-
Select the delimiter format
-
Comma
-
Tab
-
User-defined
-
-
Header row: Select if there is no header row present in the file. If there is a header in the file, the header titles will be assigned to the tabs in the data display table.
A preview of the information is displayed in the data display box at the bottom of the window.
Note: Culverts will not be rendered in the Quantm software. -
- You can import the location of Walls using data in the formats of:
-
XLS
-
Comma or Tab text files
The format for the file should be:
-
Name: Name to be assigned to the structure after import
-
Station: The start location along the alignment
-
Length: Length of the overall structure
-
Side: The side the wall will be constructed. Left or right
-
Type: The type of structure to be created. If a structure Type is not found or does not match an existing structure in the Quantm software a warning will appear prompting the user. The alignment cannot be imported if this occurs. The user has to exit the import and generate a matching entity in the cost parameters.
Using the browse button navigate to the file to be used to define wall locations.
For XLS, the following can be defined:
-
Sheet data is contained: Use the drop-down menu to select the sheet
-
Header row: Select if there is no header row present in the file. If there is a header in the file, the header titles will be assigned to the tabs in the data display table.
For text files, the following can be defined:
-
Select the delimiter format
-
Comma
-
Tab
-
User-defined
-
-
Header row: Select if there is no header row present in the file. If there is a header in the file, the header titles will be assigned to the tabs in the data display table.
A preview of the information is displayed in the data display box at the bottom of the window.
-
- You can define the templates at specific locations along the alignment. To import templates, you can use the following formats:
- XLS
- Comma or Tab text files
Templates to be assigned must be created in Quantm prior to import. If the templates are not created and the templates names in the file do not match or do not exist in the Quantm software, a warning appears. If this occurs, the alignment cannot be imported. You must exit the import and create the templates in the Template editor.
The format for the file should be:
-
Station: The start location along the alignment
-
Left: The name of the template to be assigned to the left had side
-
Right: The name of the template to be assigned to the right hand side
Use the browse button to navigate to the file to be used to define wall locations.
For XLS, the following can be defined:
-
Sheet data is contained: Use the drop-down menu to select the sheet
-
Header row: Check if there is no header row present in the file.
If there is a header in the file, the header titles will be assigned to the tabs in the data display table.
For text files, the following can be defined:
-
Select the delimiter format
-
Comma
-
Tab
-
User-defined
-
-
Header row: Check if there is no header row present in the file. If there is a header in the file, the header titles will be assigned to the tabs in the data display table.
A preview of the information is displayed in the data display at the bottom of the window. Once the alignment has been imported, you can generate reports using Quantm’s report functionality. The alignments cannot be used for optimization or duplication in the Quantm software. Alignments imported using this method is for viewing only. If alignments are required for optimization the alignments should be imported through the Alignment Import wizard.