Skip to main content

Add connection points

Modified: 26 Jun 2026 Stabicad
Stabicad
Stabicad

Define and place connection points on a drawing symbol, enabling pipes or ducts to be connected to the symbol, and save it as a custom element for reuse.

Before you start:

  • Ensure that you have an existing symbol to connect elements to in your drawing.
  • Ensure you have defined a custom folder in StabiBASE (see Set up the custom folder).

You can add connection points to symbols that do not automatically have connection logic. When you add and save this as a custom element, you can use the symbol as a fitting and connect more pipes or ducts using grips.

  1. Open the relevant palette and go to the Equipment tab.
  2. Click Add connection points.

    The dialog for defining the connection point properties opens.

  3. Define the pipe type, shape, dimensions, and connection type of the new connection point.

    The information you define is saved in the connection point you are adding.

  4. Click OK.
  5. Specify the position of the connection point on the symbol in the drawing area.

    A circle or a rectangle (depending on the connection point shape) appears on the symbol. By default, custom elements are red.

  6. Right-click to close the function.

You can now save the symbol and the newly added connection points as a custom element. Once you save it, you can click the connection point to view the grips and continue drawing pipes or ducts from it.

Submit

Table of Contents