Skip to main content

Connect to another system

Modified: 26 Jun 2026 Stabicad
Stabicad
Stabicad

Connect the system you are currently drawing to an existing system run in the drawing, allowing Stabicad to automatically insert the necessary fittings.

Before you start, ensure that you are currently drawing a system run.
Note: This function is only available while drawing in AutoCAD. Revit users should use native Revit trimming and extending tools.
With this function, you can join a new system run to an existing one. Stabicad automatically attempts to select and insert the necessary elements (for example, an elbow or a T-section) to complete the junction.
Note: This function is only available while you are drawing. If you are not actively drawing, you can use grips to continue to draw and then use this function (only when using a CAD platform).
  1. While drawing a system run, right-click to open the context menu.
  2. Select Connect to.
  3. Select the existing system (the target pipe or duct) you want to connect to.
    Stabicad attempts to make the connection by inserting the necessary fittings.
  4. Continue drawing or cancel the operation.
    If the action is unsuccessful, the issue may be one of the following:
    • The required elements (fittings) to create a valid connection are not included in your current product range.
    • The geometric complexity of the connection is too high (for example, it requires many different reducers or a complex transition).

    You can connect the elements manually.

Stabicad connects the system you were drawing to the existing system.

Submit

Table of Contents