Skip to main content

Dimension a wall

Modified: 26 Jun 2026 Stabicad
Stabicad
Stabicad

Specify the height, width, and thickness of standard or cavity walls during the drawing process.

Before you start, ensure you are actively drawing a wall (see Draw and join walls).

  1. When the command line displays Dimension/Reference point/<Starting point>, type D and press Enter.
  2. Define the vertical and horizontal dimensions of the wall:
    • For standard walls, enter the height above the floor, the width, and the total height.
    • For cavity walls, enter the width of the inner leaf, the cavity width, and the width of the outer leaf.
  3. Specify the starting point and draw the wall segments as usual.
You can now draw subsequent wall segments with these dimensions until you modify them or end the command.
Submit

Table of Contents