Skip to main content

Draw parallel system run

Modified: 26 Jun 2026 Stabicad
Stabicad
Stabicad

Draw a new system run parallel to an existing one at a specified distance.

Before you start, ensure you have an existing system run in your drawing to serve as the reference for the parallel run.

With the parallel draw function, you can create duplicate or mirrored system runs at an offset from an existing element.

  1. Open the relevant discipline palette (for example, Ventilation, Piping).
  2. Go to the Draw tab and select the desired duct or pipe element type for the new run.
  3. In AutoCAD, right-click anywhere in the drawing and select the function Parallel.
  4. Specify the distance of the parallel pipe or duct.
  5. Click the existing system run at the location where you want the new pipe to start.
  6. Move your mouse pointer to determine on which side (left or right) of the existing pipe the new parallel pipe should be.
  7. Continue drawing the parallel pipe segment, or right-click to cancel.
Stabicad draws the new pipe parallel to the existing one at the specified offset distance.
Submit

Table of Contents