Skip to main content

Hatch a ventilation duct

Modified: 25 Jun 2026 Stabicad
Stabicad
Stabicad

Apply hatch patterns and scales to ventilation components to visually distinguish system types or materials in 2D layouts.

To hatch a ventilation duct:
  1. Open the Ventilation palette and go to the Modify tab.
  2. Click Hatch ventilation duct.
  3. Type h in the command line and press Enter.

    The Hatch Settings dialog opens.

  4. Define the hatch Pattern and Scale.
  5. Click OK.
  6. Define a selection window over the ventilation components you want to hatch.
  7. Press ESC to exit the function and finalize the hatching.
Stabicad now hatches the ducts you selected.
Submit

Table of Contents