Skip to main content

Repeat door or window frame placement

Modified: 14 Jan 2026 Stabicad
Stabicad
Stabicad

Populate walls with many doors or windows using automated repeated placement tools for both fixed-interval and irregular spacing.

You can define a single door or window drame and then insert copies of it along a wall. You can place frames at regular intervals or specify varying distances for each one.

Repeat frames at fixed distances

To insert many identical door or window frames along a wall at specific intervals:
  1. Open the Building Layout palette and go to the Repeated placement with fixed distance tab.
  2. Click the door or window type to place.
  3. Insert the first frame into the wall following the standard three-point placement method (center, first side, second side).
  4. When prompted by the command line, enter the total number of additional frames to insert.
  5. Enter the interval distance between each frame.
Stabicad now interrupts the wall and inserts the frames at the defined intervals.

Repeat frames at irregular distances

To insert many identical door or window frames along a wall at irregular intervals:
  1. Open the Building Layout palette and go to the Repeated placement with variable distance tab.
  2. Click the door or window type to place.
  3. Insert the first frame into the wall.
  4. Select a base point on the newly inserted frame to serve as the reference for copies.
  5. Click additional points along the wall to place further copies of the frame.
Stabicad now interrupts the wall and inserts the frames.
Submit

Table of Contents