Create and manage views and helper spaces. You can document complex system layouts, resolve overlapping elements, and convert pipes between single line, double line, or 3D formats.
You can work with views and helper spaces to display and document complex systems. You can manage the level of detail in your drawing by converting pipes between single line, double line, and 3D formats.
Create views
- Open the relevant palette and go to the 3D tab.
- Select the view type, for example Generate isometric left view from top view.
- In the drawing, select the specific conduits, pipes, or ducts you want to include in the view.
- Specify a insertion point in the drawing area to place the view.
Note: You can use the 3D view tool to project 3D geometry into a 2D representation in your drawing, but such views are static. Changes in the 3D system do not automatically transfer to the 2D view and vice versa.
Copy views
- Open the relevant palette, go to the 3D tab, and click Copy view.
- In the drawing, select the elements you want to copy.
- Specify an insertion point to place the copied view in the drawing area.
Note: Changes in the 3D system do not automatically transfer to the 2D view and vice versa.