Skip to main content

Audit and validate electrical layouts

Modified: 26 Jun 2026 Stabicad
Stabicad
Stabicad

Audit your electrical design layout for logical connectivity, panel distribution loads, and circuit tracking parameters.

By using real-time validation checks and network monitors, you can identify logical circuit inconsistencies and track load assignments across panels before generating electrical schematics.

Audit systems with the Installation Monitor (AutoCAD only)

Before you start, ensure your drawings contain modeled electrical symbols that are linked to a target distribution panel.

Open the dynamic monitor layout to control your electrical distribution networks and obtain a live operational overview of elements linked to each panel and group.

Note: The installation monitor is only available for Stabicad Pro users and is not supported in Stabicad LT. This feature is exclusively for the AutoCAD platform.
  1. Open the Installation Monitor dialog.
  2. The interface scans your system configuration and highlights architectural or electrical discrepancies using diagnostic visual indicators:
    • Triangle Symbol Warning: Indicates a symbol contains an architectural warning or technical variation based on checks configured in StabiBASE (via Manage > Electrical Checks). These symbols are still included in electrical layout schematics.
    • Red Cross Error: Indicates a critical connection block or missing assignment. You must resolve these issues. Otherwise, the affected elements are excluded from the final electrical schematics.

Verify and change panel and circuit assignments (CAD platforms only)

Verify if symbols in your technical drawing are correctly allocated to a panel and circuit layout, and change these structural assignments for power consumers.

Note: This function operates within the AutoCAD and Trimble CAD platform platforms.
  1. Open the Electrical Palette, select the Tools tab, and click Check Panels and Circuits.
  2. Click Select symbols from drawing and choose your selection scope:
    • Apply the tracking validation to all symbols across the active drawing layout.
    • Manually click and select specific electrical objects directly within the CAD view canvas.
  3. Edit the underlying assignment values for your selection:
    1. Select one or more symbols from the structural item list in the dialog box.
    2. Right-click the selection and click Modify.
    3. Enter or choose the updated Panel and Circuit references.
  4. Optionally, to quickly replicate properties across components, click Copy Panel and Circuit and select an existing source symbol directly from the CAD platform drawing area.

    The exact distribution parameters are automatically matched to the active symbol selection in your dialog tracker.

  5. Optionally, go to the bottom pane of the main dialog and select the checkbox for checking distribution panels to verify the electrical connection paths leading to your main panel board.

Change and renumber circuits

Change, increase, decrease, or exchange circuit and subcircuit tracking numbers for symbols sharing a common electrical circuit loop.

Note: Automated circuit renumbering tools are only available for Stabicad Pro users and are not supported in Stabicad LT.
  1. Access the circuit numbering toolset based on your current workspace platform:
    • In AutoCAD: Open the Electrical Palette, select the Tools tab, and click Change Circuit Numbers.
    • In Revit: Use the Change Symbol Properties properties tracker utility to update targeted circuit identifiers.
  2. Choose your modification or batch renumbering technique:
    • Manually enter new numbering values: Click a specific cell within the New numbering column matrix to type a value. To modify many rows at once, hold the Ctrl or Shift keys, highlight the fields, and input the new character string.
      Note: If an Incorrect symbols found warning message appears, click the link path to run general validation diagnostics.
    • Automatically propagate an incremental sequence: Highlight a series of circuit rows, click Renumber, and define a custom Step size index value to automatically scale sequence parameters upward or downward.
    • Merge separate paths: Select many individual rows, click Modify, and input a shared tracking number to merge many symbols under a single circuit loop index.
    • Swap existing loop identifiers: Select exactly two distinct circuit rows in your grid map tracking list and click Exchange to flip their technical tracking values.
  3. Optionally, review subcircuit tracking strings by selecting the Show subcircuits of circuit option checkbox, then edit individual parameters as required.
    Note: Subcircuit editing functionalities are not supported for localizations in France.

Convert electrical symbols to newer AutoCAD version

Update the underlying data blocks of existing layout symbols in a drawing to a newer AutoCAD platform configuration to prevent software conflicts and asset property discrepancies.

  1. Open the appropriate Electrical palette and navigate to the Tools tab.
  2. Click Convert Electrical symbols to newer AutoCAD version.
  3. Select the symbols or selection scope across the active drawing view to execute the background translation utility.
Submit

Table of Contents