Skip to main content

Manage light fixture codes

Modified: 26 Jun 2026 Stabicad
Stabicad
Stabicad

Define and customize lighting specifications, including 3D geometry and orientation angles.

In StabiBASE, you can manage your list of light fixture codes on the company account level or the project level. You can assign light fixture codes to symbols in your AutoCAD or Revit drawing to set their properties.

To manage light fixture codes, go to StabiBASE > Manage > Product Codes.

  • Use the Project tab to manage light fixture codes on the project level.
  • Use the Company standard tab to manage light fixture codes on the company account level.

You can copy light fixture codes between projects and between the two tabs.

Assign light fixture codes to symbols

To assign light fixture codes to symbols:
  1. Go to StabiBASE > Manage > Light Fixture Codes.
  2. Open the Project tab.
  3. Select a symbol and click New.

    The New Light Fixture Code dialog opens.

  4. Define the light fixture code properties.

    You can define the light fixture code description in different languages by clicking the language icon.

  5. Click OK.
  6. Click Close.
For AutoCAD, the light fixture code changes are applied immediately.

If you are working in Revit, you need to synchronize the changes by going to the Tools tab of an electrical palette and clicking Copy family data from StabiBASE.

Edit light fixture codes

To edit and delete light fixture codes:
  1. Go to StabiBASE > Manage > Light Fixture Codes.
  2. Choose the Company standard or Project tab.
  3. Edit the light fixture codes as needed.
    • Click Delete to remove a light fixture code.
    • Click Edit to make changes to an existing light fixture code. You can edit 3D information for the light fixtures, including shape, height, width, length, and diameter.
    Note: In Revit, you can specify correction angles for a light fixture code if the 3D geometry is not correctly oriented in your Revit project.
  4. Click OK.
For AutoCAD, the product code changes are applied immediately.

If you are working in Revit, you need to synchronize the changes by going to the Tools tab of an electrical palette and clicking Copy family data from StabiBASE.

Submit

Table of Contents