Skip to main content

Review drawings

Modified: 4 Jun 2026 Tekla Structural Designer 2025
2025
Tekla Structural Designer

To apply a revision to a drawing, do the following:

  1. On the Draw tab, click Drawing Management...

    The Drawing Management dialog box opens.

  2. In the Available Styles list, select the desired drawing category.
  3. In the Available Drawings list, select the desired drawing.
  4. Click Create Revision...

    The Create Drawing Revision dialog box opens.

  5. Name the revision and type a revision note.
  6. Click OK.

    The drawings open in an available DXF tool.

Submit

Table of Contents