Skip to main content

Create partial-length UDLs or VDLs

Modified: 8 Aug 2023 Tekla Structural Designer 2025
2025
Tekla Structural Designer
Uniformly and variably distributed loads (UDLs and VDLs) can be applied to all one-dimensional member types (with the exception of braces and truss internals) as follows:
  1. Open an appropriate view and set the view regime to Structural View.
  2. In the Loading list, select an appropriate loadcase.
  3. On the Load tab, click UDL or VDL.
  4. In the Properties window, adjust the load details according to your needs.
  5. Hover the mouse pointer over the member to which you want to apply the load.
  6. Click the start point of the load along the member, or press F2 to type the exact position.
  7. Click the end point of the load along the member, or press F2 to type the exact position.
Submit

Table of Contents