Skip to main content

Side skin reinforcement in beams (ACI 318)

Modified: 6 Nov 2026 Tekla Structural Designer 2025
2025
Tekla Structural Designer

Where h of a beam or joist exceeds 900 mm (36 in), longitudinal skin (side) reinforcement is uniformly distributed along both side faces of the member1.

The code requires that skin reinforcement shall extend for a distance h / 2 from the tension face. Regardless of this in the current release of Tekla Structural Designer the skin reinforcement is provided to the full height of the beam.

Footnotes

1 ACI 318-08 Section 10.6.7; ACI 318-11 Section 10.6.7; ACI 318-14 Section 9.7.2.3; ACI 318-19 Section 9.7.2.3
Submit

Table of Contents