Skip to main content

Choice of analysis type (ACI/AISC)

Modified: 2 May 2025 Tekla Structural Designer 2025
2025
Tekla Structural Designer

In Tekla Structural Designer on the Analysis page of the Design Settings dialog you have the choice of two analysis types. These are,

  • First-order analysis (not suitable for the final design of steel structures),
  • Second-order analysis.

For steel structures: - Unless a number of specific criteria can be met, it is essential that your final design utilizes second-order analysis. However, second order analysis can be more sensitive to parts of your model that lack stiffness. For this reason it is recommended that you initially use first-order analysis to obtain sections and an overall building performance with which you are satisfied before switching to second-order analysis.

For concrete structures: - By choosing second-order analysis the global second-order effects are automatically catered for. However, if you determine that the structure is non-sway (see When should a concrete building be classed as non-sway?) you may instead opt for the design to be based on the first order analysis.

The accuracy of determination of the second-order effects for concrete structures is dependent upon a reasonable estimation of the concrete long term properties. It is therefore important that appropriate member type specific modification factors have been specified - see Use of modification factors.

Submit

Table of Contents