Tapered beam to beam (200) creates a connection between tapered beams.
Objects created
-
End plates (2)
-
Flange stiffeners (4) (optional)
-
Web stiffeners (8) (optional)
-
Bolts
-
Welds
Use for
| Situation | Description |
|---|---|
|
|
All stiffeners and end plates are created. Plates are connected with eight bolts, but you can use any number of bolts. |
Before you start
Create two tapered beams.
Selection order
-
Select the web of the main part (first beam).
-
Select the web of the secondary part (second beam).
The connection is created automatically when the secondary part is selected.
Part identification key

| Description | |
|---|---|
|
1 |
End plates |
|
2 |
Web stiffeners |
|
3 |
Flange stiffeners |
Picture tab
Use the Picture tab to define the dimensions of the end plates and stiffeners, the location of the stiffeners, and whether the beam flange is fitted.
Dimensions

| Description | |
|---|---|
|
1 |
Horizontal dimension of the flange stiffener. |
|
2 |
Vertical dimension of the flange stiffener. |
|
3 |
Top web stiffener edge distance to the beam flange. |
|
4 |
Bottom web stiffener edge distance to the beam flange. |
|
5 |
End plate dimension from the beam edge. |
|
6 |
Web stiffener dimension from the end plate. |
Web stiffeners
| Option | Description |
|---|---|
|
|
Default Top and bottom web stiffeners are created. AutoDefaults can change this option. |
|
|
Top and bottom web stiffeners are created. |
|
|
Top web stiffeners are created. |
|
|
Bottom web stiffeners are created. |
|
|
Web stiffeners are not created. |
Beam flange
| Option | Description |
|---|---|
|
|
Default Beam flanges are perpendicular to the beam axis. AutoDefaults can change this option. |
|
|
Beam flanges are fitted to be level with the end plates. |
|
|
Beam flanges are perpendicular to the beam axis. |
Parts tab
Use the Parts tab to define the properties of end plates, web stiffeners, and flange stiffeners. Set the part thickness to 0 to omit a part.
Parts
| Option | Description |
|---|---|
|
End plate |
Thickness and width of the end plate. |
|
Web stiffener |
Thickness and width of the web stiffener. |
|
Flange stiffener |
Thickness of the flange stiffener. |
|
Option |
Description |
Default |
|---|---|---|
|
Pos_No |
Prefix and start number for the part position number. Some components have a second row of fields where you can enter the assembly position number. |
The default part start number is defined in the Components settings in . |
|
Material |
Material grade. |
The default material is defined in the Part material box in the Components settings in . |
|
Name |
Name that is shown in drawings and reports. |
Chamfer tab
Use the Chamfer tab to define the flange and web stiffener shape, type, and dimensions.
Flange stiffener
| Option | Description |
|---|---|
|
|
Default Bevel, chamfered corner AutoDefaults can change this option. |
|
|
Bevel, chamfered corner |
|
|
Square, one chamfered corner |
|
|
Square, two chamfered corners |
Chamfer type
| Option | Description |
|---|---|
|
|
Default No chamfer AutoDefaults can change this option. |
|
|
No chamfer |
|
|
Line chamfer |
|
|
Convex arc chamfer |
|
|
Concave arc chamfer |
Chamfer dimensions
You can define the chamfer dimensions for both web and flange stiffeners.

| Description | |
|---|---|
|
1 |
Horizontal chamfer dimension. |
|
2 |
Vertical chamfer dimension. |
Bolts tab
Use the Bolts tab to define the bolt group dimensions and bolt properties.
Bolt group dimensions

| Description | |
|---|---|
|
1 |
Bolt edge distance. Edge distance is the distance from the center of a bolt to the edge of the part. |
|
2 |
Number of bolts. |
|
3 |
Bolt spacing. Use a space to separate bolt spacing values. Enter a value for each space between bolts. For example, if there are 3 bolts, enter 2 values. |
Bolt basic properties
|
Option |
Description |
Default |
|---|---|---|
|
Bolt size |
Bolt diameter. |
Available sizes are defined in the bolt assembly catalog. |
|
Bolt standard |
Bolt standard to be used inside the component. |
Available standards are defined in the bolt assembly catalog. |
|
Tolerance |
Gap between the bolt and the hole. |
|
|
Thread in mat |
Defines whether the thread may be within the bolted parts when bolts are used with a shaft. This has no effect when full-threaded bolts are used. |
Yes |
|
Site/Workshop |
Location where the bolts should be attached. |
Site |
Slotted holes
You can define slotted, oversized, or tapped holes.
|
Option |
Description |
Default |
|---|---|---|
|
1 |
Vertical dimension of slotted hole. |
0, which results in a round hole. |
|
2 |
Horizontal dimension of slotted hole, or allowance for oversized holes. |
0, which results in a round hole. |
|
Hole type |
Slotted creates slotted holes. Oversized creates oversized holes. No hole does not create holes. Tapped creates tapped holes. |
|
|
Rotate Slots |
When the hole type is Slotted, this option rotates the slotted holes. |
|
|
Slots in |
Part(s) in which slotted holes are created. The options depend on the component in question. |
Bolt assembly
The selected check boxes define which component objects (bolt, washers, and nuts) are used in the bolt assembly.
If you want to create a hole only, clear all the check boxes.
To modify the bolt assembly in an existing component, select the Effect in modify check box and click Modify.
Bolt length increase
Define how much the bolt length is increased. Use this option when, for example, painting requires the bolt length to be increased.
General tab
Click the link below to find out more:
Analysis tab
Click the link below to find out more:
Welds
Click the link below to find out more:














