Clock In / Clock Out

The clock-in / clock-out feature in Traqspera allows you to clock in to a specific job on the current day.

1. Select Time > Clock In and Out.
2. Select a Job.
3. Select a Phase.

   If a job has only one phase, that phase prefills this field automatically.

   Note: Additional fields, including Department, Equipment, Per Diem, Additional Hour Type, Rate Level, Travel, Union Code, and Wage Code, may display during clock-in, depending on your system setup.
4. Select Clock In.
5. To track a break while clocked in:
   1. Return to the Clock In/Out page.
   2. Select Start Break.
      Note: This button will not display if automatic break rules are applied.
   3. When your break is over, return to the Clock In/Out page, and select End Break.
6. To track hours against a different job without clocking out:
   1. Return to the Clock In/Out page.
   2. Select the Switch Jobs button.
   3. Select the new job (and any other required fields).
   4. Select Confirm.
7. When you are finished working, return to the Clock In/Out page, and then select Clock Out.