- Open the job with which you want to work in the Manage Earthwork Estimates screen.
- Select the Takeoff tab, if it is not already active.
-
In the Active Layer field on the toolbar, click
to select the layer you want to view.
-
Click Multi
on the
speedbar.
- Select the lines for which you want to set the same elevation.
- Click in the All Tasks pane.
-
Under Selected Elevations, choose the appropriate option:
Replace with Factor – Replaces the current elevations of the lines with the value you enter in the Factor field. For example, if the current elevations are 247 feet, and you enter 256 in the Factor field, then the new elevations of the lines will be 256 feet.
Add Factor – Adds the value you enter in the Factor field to the elevation of the lines you selected. For example, if the current elevations are 247 feet, and you enter a 10 in the Factor field and select the Add Factor option, the new elevations of the lines will be 257.
Subtract Factor – Subtracts the value you enter in the Factor field from the elevations of the lines you selected. For example, if the current elevations are 247 feet, and you enter a 10 in the Factor field and select the Subtract Factor option, the new elevations of the lines will be 237.
- In the Factor field, enter the appropriate value based on your selection in Selected Elevations.
- Click OK.