The Drawings Library holds uploaded project drawings for you to assign and use across multiple locations. These drawings can be uploaded from Trimble Connect, VFP, or from your computer.
Note: Currently you can assign a drawing to a new location only on the Drawing Calibration page. We’ll be adding this functionality to the Drawings Library in a future release.
If you’re uploading a drawing from VFP you:- Must be logged in to VFP
- Must have geometry permissions to see the library
If you're uploading a drawing from Trimble
Connect, you:
- Must be logged in to Trimble Connect
Once a drawing is uploaded to the library, it cannot be deleted.
Drawings Library Definitions
- Upload at DPI
- Choose the quality of the image. A DPI of 300 results in better quality, but Field View may perform more slowly. An image with a lower DPI will have lower quality, but Field View will perform faster.
- Convert to Grayscale
- Select this to convert a color image to shades of gray. This option uses less memory than a color image.
- Description
- A description of the drawing. This is for the library only and isn’t visible when the drawing is used in a location. We’ll be adding the ability to use the description from VFP in a future release.
- Revision
- A number for the revision. Decimal places can be used. You may choose to number a small change as .1, and number a larger change with the next whole number.