Pasar al contenido principal

Link or unlink a 360 capture to a record

Modified: 11 Jul 2026 ProjectSight

You can link a 360 capture photo or video to a record that already exists.

  1. Select the type of record from the Project menu.
    ProjectSight displays those records for the project.
  2. Select the record.
  3. Select the Add links icon at the bottom of the right panel and choose 360 Captures.
    ProjectSight displays the available 360 captures
  4. If needed, use the search or the filters at the top of the page to find the capture you want. The filters include the drawings that contain the captures. Select Reset if you need to clear the filter.
  5. Put your mouse on the photo or video capture to link to the annotation and select the checkbox.
  6. Select other captures if needed. Each time you select a capture, the number count in the upper right increases.
  7. When you are finished selecting all the photo and video captures for the record, choose Link in the upper right corner.
    ProjectSight links the records to the selected stations and returns you to the right panel.
  8. Select Save for the panel to save the stations.

ProjectSight adds the 360 captures as an annotation to the selected record.

Enviar

Table of Contents