Select actions for buttons on the stylus or puck

  1. On the Digitizer Buttons tab, select the button you want to change.
    Note: If you are using a 16-button digitizer puck, you will need to press the 0 button to select buttons on the menu pad.
  2. Click Change.
  3. If you want to select an action that is specific to the Earthwork module, select the Commands option, and select the action you want to assign to the button.
    Note: The Tip button of a stylus should always be set to FIRE button, which enables you to trace over a drawing or digitize elevations and areas.
  4. If you want to select an action that is a keyboard key, select the Keyboard buttons option, and select the action you want to assign to the key.
  5. Click OK.
  6. Repeat these steps for each button for which you want to select an action.