Přejít k hlavnímu obsahu

Define flat bar sizes with the Fltprops.inp file

Tekla Structures 2021
2021
Tekla Structures

Use the Fltprops.inp file, located in the \profil folder under the environment folder ..\ProgramData\Trimble\TeklaStructures\<version>\environments\, to define flat bar thickness, width and material. The exact location may vary depending on your environment.

Note:

Copy the Fltprops.inp file to a model, project or firm folder and then modify the file in the new location as required.

The first row in the file contains flat bar material definitions (enclosed in quotes " ", and without spaces) followed by plate thicknesses. If you do not define a material, you can use all materials for all flat bars. The following rows define the widths of available flat bars.

The units are millimeters.

Example

Fltprops.inp contains the following data:

With the above data, Tekla Structures displays the following plates as flat bars:

Plate

Material

5x40, 5x45, 6x50, 6x55

All materials

8x60, 8x65, 10x70, 10x75

S235

10x100, 10x110, 15x200, 15x220

S275J0

The flat bars get the prefix that is set in the XS_​FLAT_​PREFIX advanced option.

Odeslat

Table of Contents