Drawing mesh frame (m121)
Drawing mesh frame (m121) can be used to create frames around reinforcement meshes in drawings. The frame and reinforcement representation can be defined separately using line, hatch, and reinforcement style settings.
Back to topObjects created
Drawing mesh frames.
Back to topUse for
To improve the representation of reinforcement meshes in drawings by creating a frame around the mesh.
Back to topBefore you start
Ensure that the drawing contains reinforcement meshes for which you want to create a mesh frame.
Back to topSelection order
Select the objects in the drawing for which you want to create a mesh frame and click Create on selected objects.
Back to topPart identification key
-
Tab Frame
Tab Frame can be used to define the line and hatch properties of the mesh frame.
| Option | Description |
|---|---|
| Line style | Defines the line style of the mesh frame. Use the available settings to define the line type and appearance of the frame. |
| Hatch | Defines the hatch used inside the mesh frame. Select the required hatch pattern from the list. Select None when no hatch is required. Use the additional hatch settings to define the appearance of the selected hatch. |
Tab Reinforcement
Tab Reinforcement can be used to control the representation of reinforcement within the mesh frame.
| Option | Description |
|---|---|
| Override reinforcement style | Defines whether the reinforcement representation is overridden by the settings defined on this tab. When set to No, the reinforcement style is not overridden. |
| Rebars | Defines the representation of reinforcing bars when Override reinforcement style is enabled. |
| Meshes - Longitudinal bars | Defines the representation of the longitudinal bars of reinforcement meshes when Override reinforcement style is enabled. |
| Meshes - Crossing bars | Defines the representation of the crossing bars of reinforcement meshes when Override reinforcement style is enabled. |
Tab About
Information about the "build" date of the tool. This date may differ from the date in the tool you are using, but the content may nevertheless be the same. This date may be required when you contact the helpdesk.
All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.