Windbracing (S55) creates a complete windbracing positioned in the slope of the roof. The windbraces can be made from angles (1, 2, or 3 components) or in hollow sections (N or V) with the connections.
Objects created
-
Braces
-
Compression beams (optional)
-
Connections between the braces and the rafters
-
Bolts
Use for
| Situation | Description |
|---|---|
|
|
Bracing crosses between rafters and purlins |
Selection order
-
Select the first column (rafter).
-
Select the second column (rafter).
-
Select the purlins between which the braces are generated.
-
End the selection with the middle mouse button.
Part identification key

| Description | |
|---|---|
|
1 |
Bracing |
|
2 |
Connection between the main part and the bracing |
|
3 |
Connection at the intersection of braces |
Picture tab
Use the Picture tab to define the size and position of the connection.
Dimensions

| Description | |
|---|---|
|
1 |
Horizontal distance between the first purlin and the the bracing start point. |
|
2 |
Horizontal distance between the intermediate purlin and the the bracing start point. |
|
3 |
Horizontal distance between the last purlin and the the bracing start point. |
Parts tab
Use the Parts tab to define the part properties.
Parts
| Option | Description |
|---|---|
|
Diagonals |
Thickness, width, and height of the diagonals. |
|
Option |
Description |
Default |
|---|---|---|
|
Pos_No |
Prefix and start number for the part position number. Some components have a second row of fields where you can enter the assembly position number. |
The default part start number is defined in the Components settings in . |
|
Material |
Material grade. |
The default material is defined in the Part material box in the Components settings in . |
|
Name |
Name that is shown in drawings and reports. |
Twin profile
Define if diagonals are created as one profile or as a twin profile.
|
Option |
Description |
|---|---|
|
|
One profile is created. |
|
|
Twin profile is created. |
Gap between the twin profile
When using a twin profile, specify the distance between the profiles.

|
Option |
Description |
|---|---|
|
1 |
Distance between the twin profiles. |
Diagonal class
Define the diagonal class to display the diagonal braces with different colors and in filters.

|
Option |
Description |
|---|---|
|
1 |
The value for displaying the diagonal braces with different colors and in filters. |
Profile below purlin
Select the profile type, number, and material.
Position of profile below purlin
Select at which position the profile is created.
|
Option |
Description |
|---|---|
|
|
The profile is created in the first and the last purlin. |
|
|
The profile is created in all the purlins. |
Parameters tab
Use the Parameters tab to define the position of diagonals, reference lines, number of profiles, joint connections, and the connection between the diagonal and rafter.
Number of profiles
This option determines the number of profiles and their orientation.
|
Option |
Description |
|---|---|
|
|
One profile: All diagonals are oriented in the same way. |
|
|
Two profiles: If the option for twin profile is activated, the component switches to two profiles automatically. |
|
|
Three profiles: If three profiles and single profiles have been selected, it is possible to generate a gusset in the middle (Bolted gusset 11, field: Cross middle attributes). |
|
|
Four profiles: If the option for twin profile is activated, the component switches to four profiles automatically. |
|
|
Reversed: All diagonals are oriented in the reversed direction to the first option. |
Horizontal position of diagonals
Define the position of diagonals in relation to the column.
|
Option |
Description |
|---|---|
|
|
Outside the left flange of the column |
|
|
Inside the left flange of the column |
|
|
In the middle of the column |
|
|
Inside the right flange of the column |
|
|
Outside the right flange of the column |
Additional offset
When placing the diagonals in the middle of the column, you can define an additional offset for the position of diagonals.

|
Option |
Description |
|---|---|
|
1 |
The offset of the diagonal from the middle of the column. |
Location of reference line
Define the location for the reference line of the diagonals.
|
Option |
Description |
|---|---|
|
|
The reference line is located in the middle. |
|
|
The reference line is located on the left. |
|
|
The reference line is located on the right. |
Reference line offset
Define the offset from the reference line of diagonals.

|
Option |
Description |
|---|---|
|
1 |
The offset from the reference line of diagonals. |
Connection diagonal/rafter
The following options for the connection between the diagonal and main part are available:
|
Option |
Description |
|---|---|
|
|
Bolted gusset (11) If there are two profiles, the macro generates a bolt in the middle. |
|
|
Tube gusset (20) |
|
|
Welded gusset (10) |
|
|
Portal bracing (105) |
|
|
Windbrace (110) |
|
|
Bolts: When this option is used, bolts, fittings, and work points are defined in the Diag/Main tab. |
Joint connection
Define the joint connection.
| Option | Description |
|---|---|
|
Class |
When using a joint connection, define the class for the component set on the General tab of the called component. |
Bolts tab
Use the Bolts tab to define the bolt group dimensions and bolt properties.

| Description | |
|---|---|
|
1 |
Dimension for horizontal bolt group position. |
|
2 |
Bolt edge distance. Edge distance is the distance from the center of a bolt to the edge of the part. |
|
3 |
Bolt spacing. |
|
4 |
Distance between the last bolt and modeling points. |
Modeling points
Define if modeling points are created.
|
|
Modeling points are not created. |
|
|
Modeling points are created. |
Bolt basic properties
|
Option |
Description |
Default |
|---|---|---|
|
Bolt size |
Bolt diameter. |
Available sizes are defined in the bolt assembly catalog. |
|
Bolt standard |
Bolt standard to be used inside the component. |
Available standards are defined in the bolt assembly catalog. |
|
Tolerance |
Gap between the bolt and the hole. |
|
|
Thread in mat |
Defines whether the thread may be within the bolted parts when bolts are used with a shaft. This has no effect when full-threaded bolts are used. |
Yes |
|
Site/Workshop |
Location where the bolts should be attached. |
Site |
Bolt assembly
The selected check boxes define which component objects (bolt, washers, and nuts) are used in the bolt assembly.
If you want to create a hole only, clear all the check boxes.
To modify the bolt assembly in an existing component, select the Effect in modify check box and click Modify.
Bolt length increase
Define how much the bolt length is increased. Use this option when, for example, painting requires the bolt length to be increased.

























