Center Lines on Section Views and End Details
Not version-specific
Tekla Structures
Environment
United States (Imperial)
United States (Metric)
Question: I am trying to figure out how to turn on the centerline of an End view of a profile in drawings. Is there a setting or advanced option that is keeping this from appearing?
Answer: When a part's centerline is perpendicular to a view, it is visualized as a cross. The size of that "cross" is defined by the Symbol offset property in the Content tab. On versions up to 2019, symbol offsets in drawings' Section views and End details have been consistently zero (0), and thus the size of the cross in those views is not visible. As demonstrated by the following image, the centerline cross becomes apparent after manually adding a symbol offset value other than 0.
On versions 2020 and newer, the default offset is no longer 0, so the centerline will become visualized by simply activating the Center line option.
Image
Answer: When a part's centerline is perpendicular to a view, it is visualized as a cross. The size of that "cross" is defined by the Symbol offset property in the Content tab. On versions up to 2019, symbol offsets in drawings' Section views and End details have been consistently zero (0), and thus the size of the cross in those views is not visible. As demonstrated by the following image, the centerline cross becomes apparent after manually adding a symbol offset value other than 0.
Image
On versions 2020 and newer, the default offset is no longer 0, so the centerline will become visualized by simply activating the Center line option.