Skip to main content

Albion Cladding Joint Rail Column (60)

Tekla Structures - Not version-specific
Not version-specific
Tekla Structures
Environment
Not environment-specific

The Albion Cladding Joint Rail Column macro can be used to define individual cladding joint rails between rails and cleats.

Before and after

Image
tekla-structures-albion-60-before.png

 

Image
tekla-structures-albion-60-after.png

Notes

  • Any modification of the selected parts will cause this macro to be updated.
  • Most of the data required for this macro is fixed by Albion and stored in a series of data files supplied with Tekla Structures. Where standard data is not applicable, then certain items can be modified through the Parameters tab of the properties panel, but it is also possible to tailor the data files to individual requirements. This would require assistance from Tekla Structures support.
  • Diagonal tie wire should not be used at the same position as a CJR on a column as Albion do not have a standard way of dealing with this case.
  • All rails must be connected to the columns using the Albion Cold Rolled Sleeved (118).
  • All rail and cleats lengths must be parallel.  

Selection order example

  1. Column
  2. Rails
  3. Click middle mouse button
Image
tekla-structures-albion-60-selection-order.png

See also

Albion cold rolled - Important information
Albion Cladding Joint Rail Column (60) - Parts tab
Albion Cladding Joint Rail Column (60) - Parameters tab

Submit