Skip to main content

Edge chamfer annotation tool

Tekla Structures - Not version-specific
Not version-specific
Tekla Structures
Environment
Not environment-specific

Image
01

Tool Edge chamfer annotation tool can be used to create symbols on the edges of chamfers, or in the openings. User can define various types of symbols which can be used on different types of edges.

 

Parts tab

In the Parts tab, there can be defined different edges annotation types and symbol, or text properties

 

Image
02

 

Option Description
1
Image
03
Annotations will be created on every edge type. Depending on the selected annotation type (Symbol/Text) in the field nr.: 3, its properties can be set using field 7/8
Image
04
Annotations will be created on every edge type, except the red cross marks. Depending on the selected annotation type (Symbol/Text) in the field nr.: 3, its properties can be set using field 7/8
Image
05
Each annotation type is represented by the number and can be defined independently. Depending on the selected annotation type (Symbol/Text) in the field nr.: 3, its properties can be set using tab page Symbols/Text
Image
06
This option can be used when model has primary and secondary part. Each of these parts can have different edges annotations. This can be defined using fields 4 and 5.  Also field 2 is active
Image
07
This option can be used when model has primary and secondary part. Each of these parts can have different edges annotations. This can be defined using fields 4 and 5.  Also field 2 is active
2

Select the type of view, where annotations will be created. Availability depends on the choice in the filed nr.: 1

Options:

  • Default
  • 3D view
  • Back view
  • Detail view
  • End view
  • Front view
  • Model view
  • Section view
  • Top view
3

Select, if annotations are symbols, or text

Options:

  • Draw symbols
  • Draw text
4

Define annotations for the primary part

  • Edge numbers: fill in the edge number according to the picture
  • Symbol numbers: fill in the symbol number to the corresponding edge number from the picture

Availability depends on the choice in the filed nr.: 1

5

Define annotations for the secondary part

  • Edge numbers: fill in the edge number according to the picture
  • Symbol numbers: fill in the symbol number to the corresponding edge number from the picture

Availability depends on the choice in the filed nr.: 1

6

Define annotations for the selected view in the field nr.: 2

  • Edge numbers: fill in the edge number according to the picture
  • Symbol numbers: fill in the symbol number to the corresponding edge number from the picture

Availability depends on the choice in the filed nr.: 1

7

Define properties of created symbols. Available only if Draw symbols is chosen in the field.: 3

  • Symbol file: select preferred file containing symbols
  • Symbol: select symbol number
  • Color: select symbol color
  • Height: select symbol height
  • Rotation: set symbol rotation in degrees
8

Define properties of created text annotations. Available only if Draw text is chosen in the field.: 3

  • Properties: select preferred properties file
  • Text: fill in desired annotation text
  • Offset: set text offset
Mark distance Set the distance of the mark from the edge
Create on selected parts or view If part or view is selected, this button runs the tool

 

 

Openings tab

In the Openings tab, there can be defined different opening annotation types and symbol, or text properties

 

Image
08

 

Option Description
1
Image
09
No annotations will be created on openings
Image
10
Annotations will be created on openings as illustrated on the picture. Depending on the selected annotation type (Symbol/Text) in the field nr.: 3, its properties can be set using field 6/7
Image
11
Annotations will be created on openings as illustrated on the picture. Depending on the selected annotation type (Symbol/Text) in the field nr.: 3, its properties can be set using field 6/7
Image
12
Each annotation type is represented by the number and can be defined independently. Depending on the selected annotation type (Symbol/Text) in the field nr.: 3, its properties can be set using tab page Symbols/Text
Image
13
This option can be used when model has primary and secondary part. Each of these parts can have different edges annotations. This can be defined using fields 4.  Also field 2 is active
2

Select the type of view, where annotations will be created. Availability depends on the choice in the filed nr.: 1

Options:

  • Default
  • 3D view
  • Back view
  • Detail view
  • End view
  • Front view
  • Model view
  • Section view
  • Top view
3

Select, if annotations are symbols, or text

Options:

  • Draw symbols
  • Draw text
4

Define annotations for openings

  • Edge numbers: fill in the edge number according to the picture
  • Symbol numbers: fill in the symbol number to the corresponding edge number from the picture

Availability depends on the choice in the filed nr.: 1

5

Define annotations for the selected view in the field nr.: 2

  • Edge numbers: fill in the edge number according to the picture
  • Symbol numbers: fill in the symbol number to the corresponding edge number from the picture

Availability depends on the choice in the filed nr.: 1

6

Define properties of created symbols. Available only if Draw symbols is chosen in the field.: 3

  • Symbol file: select preferred file containing symbols
  • Symbol: select symbol number
  • Color: select symbol color
  • Height: select symbol height
  • Rotation: set symbol rotation in degrees
7

Define properties of created text annotations. Available only if Draw text is chosen in the field.: 3

  • Properties: select preferred properties file
  • Text: fill in desired annotation text
  • Offset: set text offset
Mark distance Set the distance of the mark from the edge
Create on selected parts or view If part or view is selected, this button runs the tool

 

Symbols tab

In the Symbols tab, there can be defined annotation symbols independently

 

Image
14

 

 

Option Description
1

 

Number of the annotation symbol, can be selected as an option in the Parts tab page
Symbol file

Select preferred file containing symbols

Symbol Select symbol number
Color Select symbol color
Height Select symbol height
Rotation Set symbol rotation in degrees
Create on selected parts or view If part or view is selected, this button runs the tool

 

Texts tab

In the Texts tab, there can be defined annotation texts independently

 

Image
15

 

Option Description
1

Number of the annotation text, can be selected as an option in the Parts tab page

Properties

Select preferred properties file

Text

Fill in desired annotation text

Offset Set text offset
Create on selected parts or view

If part or view is selected, this button runs the tool

 

Advanced tab

In the Advanced tab, there can be defined general tool settings

 

Image
16

 

Option Description
Create for all parts in assembly

Select, if the annotations will be created for all parts in assembly

Options:

  • No
  • Yes
Create symbols for main parts

Select, if the annotation symbols will be created for main parts

Options:

  • Yes
  • No
Create symbols for secondary parts

Select, if the annotation symbols will be created for secondary parts

Options:

  • Yes
  • No
Apply settings to filtered objects

Select, if the tool will be used only to filtered objects. Filters can be set bellow

Options:

  • No
  • Yes
Filters

Choose preferred filter file. Active only if the option Apply settings to filtered objects is set to Yes

Attributes Choose attribute of the selected filter. Active only if the option Apply settings to filtered objects is set to Yes
Create on selected parts or view If part or view is selected, this button runs the tool

 

 

All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.

Submit