Skip to main content

Create Multiple Sections In Drawings (DR004)

Tekla Structures - Not version-specific
Not version-specific
Tekla Structures
Environment
Construsoft European
Netherlands

Image
Create_Multiple_Sections_In_Drawings_DR004_Thumbnail

 

System component Create Multiple Sections In Drawings (DR004) can be used to generate multiple vertical or horizontal sections on picked positions in an assembly drawing or cast unit drawing. 

Back to top

Objects created

  • Sections
Back to top

Use for

Generate vertical or horizontal sections in a drawing.

Back to top

Before you start

Create a assembly drawing or cast unit drawing. 

Back to top

Selection order

1. Open the drawing.
2. Open the tool.
3. Choose the desired settings. 
4. Pick the desired section positions. 
5. End command by pressing the middle mouse button. Sections will be generated on picked positions and the section views are placed next to the view in which the sections are created.

Back to top

Part identification key

Create sections.

Image
Create_Multiple_Sections_In_Drawings_DR004_Identification_KeyCreate_Multiple_Sections_In_Drawings_DR004_Identification_Key

 

 Part
1Original drawing.
2Drawing after creating multiple sections using Create Multiple Sections In Drawings (DR004).

Content tab

Tab Content shows the options creating the sections.

Image
Create_Multiple_Sections_In_Drawings_DR004_Tab_Content

 

OptionDescription
1

Select the section direction and at which side of the view the section views should be placed. The following options are available: 

  • Section view direction right, section view placement right.
Image
DR004_Tab_Content_1-1
  • Section view direction left, section view placement right.
Image
DR004_Tab_Content_1-2
  • Section view direction right, section view placement left.
Image
DR004_Tab_Content_1-3
  • Section view direction left, section view placement left.
Image
DR004_Tab_Content_1-4
  • Section view direction down, section view placement up. 
Image
DR004_Tab_Content_1-5
  •  Section view direction up, section view placement up. 
Image
DR004_Tab_Content_1-6
  • Section view direction down, section view placement down.  
Image
DR004_Tab_Content_1-7
  • Section view direction up, section view placement down. 
Image
DR004_Tab_Content_1-8
2Set the view depth down.
3Set the view depth up.
4Set the view attributes by selecting a saved view setting or using the currently applied view settings.
5If desired there can be different view settings applied at specific points (/section positions). In this field the points (/section position) numbers can be set for which you want to apply specific view settings.
6Set the view attributes for the sections created at points (/section positions) set in option (5) by selecting a saved view setting or using the currently applied view settings.
7

Set the section view scale. The following options are available: 

  • Same as main view.
  • Like defined in selected view attributes.
  • Value (when selected option number 6 will become available).
8Set the section view scale manually (this field is available depending on the selected option at option number 5).
9

Run. Perform the following steps: 

  • Pick the desired section positions.
  • End command by pressing the middle mouse button. Sections will be generated on picked positions and the section views are placed next to the view in which the sections are created.

 

About tab

Information about the "build" date of the tool. This date may differ from the date in the tool you are using, but the content may nevertheless be the same. This date may be required when you contact the helpdesk.  

Image
Create_Multiple_Sections_In_Drawings_DR004_Tab_About

All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.

Back to top
Submit