Skip to main content

Dovetail Tenon and Mortise (j151)

Tekla Structures - Not version-specific
Not version-specific
Tekla Structures
Environment
Netherlands

Image
001

 

Plug-in Dovetail Tenon And Mortise (j151) creates dovetail tenon and mortise joints which can be performed on a woodworking machine such as Hundegger or machines using BTL files.

 

Click here to download the plug-in from Tekla Warehouse.

Back to top

Created objects

  • Dovetail tenon and mortise joint
Back to top

Used for

SituationDescription
Image
j151_006
Right-angle dovetail tenon and mortise joint.
Image
j151_007
Angle dovetail tenon and mortise joint.
Image
j151_008
Along dovetail tenon and mortise joint.
Image
j151_009
Along dovetail tenon and mortise joint at an angle.
Back to top

Before you start

Create 2 beams in which the joint will be applied.

Back to top

Selection order

  1. Pick main part (dovetail mortise)
  2. Pick secondary part (dovetail tenon)

 

Picture tab

The "Picture" tab shows a picture of the result of a dovetail tenon and mortise joint.

Image
003

 

OptionDescription
Dovetail TenonTenon joint
Dovetail MortiseMortise joint
Dovetail TenonTenon joint longitudinal direction
Dovetail Mortise FrontMortise joint longitudinal direction

Parameters tab

On the "Parameters" tab, define the properties of the tenon and mortise joint.

Image
004

 

OptionDescription
Dovetail Tenon name

The designation for the tenon joint. This is important for machine exports.

Standard: Dovetail Tenon

Dovetail Mortise name

The designation for the mortise joint. This is important for machine exports.

Standard: Dovetail Mortise

Part contact facesGap between parts of the joint.
Around tenonThe gap between the tenon and the mortise. The value specified here increases the mortise size. The tenon maintains the dimension specified at (2).
Tenon end face and mortiseGap between the length of the tenon and the mortise. The value specified here makes the mortise larger. The tenon maintains the dimension specified at (6).
1Distance that the tenon is placed from the centre of the beam.
2Tenon height.
3Radius of tenon rounding.
4Width of the dovetail tenon at the bottom. This value should be at least 1mm. The width of the pin at the top depends on the type tool. The width of the flat part at the bottom of the tenon, the radius and the bevel at the sides determine the width of the top of the tenon.
5Orientation of the tenon. By clicking on the side around the bar, the side lights up blue and a checkmark appears. Only the active side lights up blue.
6Tenon lenght.

7

Distance from start of tenon to top of beam.Angular rotation around the axis of the tenon.
8Angle at the bottom of the dovetail tenon. Depends on the tool of the machine. This is always a fixed value per tool.
α

Angular rotation around the axis of the tenon.

When connecting under single or double mitre with the dovetail joint, it is necessary to determine the angle α (alpha). This is explained in the step-by-step plan below:

  1. Place a work plane on the indicated (magenta-colored) surface where the dovetail joint meets. In this case, on the inside of the corner throat. 

    Image
    j151_010
  2. Go to the Applications and Components database and find the Distance (ML030).
  3. Double-click the tool and click Distance to create a distance to measure 

    Image
    007
  4. Measure the distance across the edge of the secondary part to find out the Angle in XY Plane. It is 70.513° in this example. 

    Image
    008
  5. We calculate angle a as follows: 90°-70,513°=19,487°. 

    Image
    009
  6. Depending on the rotation of the work plane, the angle must be made negative to get the correct rotation of the plugin. If you want to set multiple decimals, you can do so via File > Options > Settings > Units and decimals.

    Image
    010
  7. If this is then done, we still have to correct the distance near angle α (alpha) to get the joint in the right place. This is because the dovetail joint from Hundegger determines its position relative to the center of the bottom of the milling.
βChamfer the tenon at the sides.

General tab

Click the link below to find out more:
General tab

Image
005

About tab 

Information about the "build" date of the tool. This date may differ from the date in the tool you are using, but the content may nevertheless be the same. This date may be required when you contact the helpdesk.

Image
tab about
All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.
 

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.

Back to top
Submit