Skip to main content

TO Lap Joint (j152)

Tekla Structures - Not version-specific
Not version-specific
Tekla Structures
Environment
Not environment-specific

Image
001

 

Plug-in Lap Joint (j152) creates simple and complex lap joints joints which can be performed on a woodworking machine such as Hundegger or machines using BTL files.

 

Click here to download the plug-in from Tekla Warehouse.

Back to top

Created objects

  • Simple and complex lap joints
Back to top

Used for

SituationDescription
Image
j152_012
Lap joint in the middle of two beams.
Image
j152_013
Lap joint with a hook in the longitudinal direction.
Image
j152_014
Lap joint at the end of the beams.
Back to top

Before you start

Create 2 beams in which the joint will be applied.

Back to top

Selection order

  1. Pick main part
  2. Pick secondary part

 

Picture tab

The "Picture" tab shows a picture of the result of a lap joint.

Image
003

 

OptionDescription
Lap JointLap joint
Skew Lap JointSkew lap joint

Parameters tab

On the "Parameters" tab, define the properties of the lap joint.

Image
004

 

OptionDescription
Fitting option

There are 2 fitting options available. The options are: 

Image
j152_006
The beams will be fitted. The length of the lap joint can be specified at point 1. This determines where the fitting is placed.
Image
j152_007
The beams are not fitted and will continues. No length can be specified. This value field will be greyed out.
Reference side

It is possible to indicate the Reference side (orientation) by clicking on one of the four sides of the square. The options are:

Image
j152_015
1
There are 4 types of lap joints available. The options are:
Image
j152_009
Lap joint.
Image
j152_010
Lap joint with notch.
Image
j152_011
Skew lap joint.
Image
j152_008
Skew lap joint with notch.

General tab

Click the link below to find out more:
General tab

Image
005

About tab

Information about the "build" date of the tool. This date may differ from the date in the tool you are using, but the content may nevertheless be the same. This date may be required when you contact the helpdesk.

Image
006

All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.

 

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.

Back to top
Submit