Five drawing variants are grouped together as planar drawings:
-
General Arrangement - Layout drawing of a 2D level or frame.
-
Beam End Forces - General arrangement that includes the forces at steel beam ends. (Use case: steel connection design)
-
Column Splice Loads - Frame general arrangement that includes the loads at splice locations in steel columns. (Use case: steel connection design)
-
Foundation Reactions - General arrangement that includes support reactions. (Use case: foundation design)
-
Loading Plan - General arrangement that includes applied loads for a selected loadcase.
Individual planar drawings can be created directly from an appropriate 2D view as described in the topics below. Alternatively, multiple planar drawings can be created as a batch using the Drawing Management command.
Configure planar drawing options
- On the Draw ribbon, click Settings
- Go to .
- Click the drawing type whose options you want to review or adjust.
- Adjust the drawing options according to your needs.
- Click OK.
You can also adjust the layer configurations and layer styles if required in a similar way.
Create a general arrangement drawing
To create an individual general arrangement drawing, do the following:
Create a beam end force drawing
Beam end force drawings are general arrangement drawings that also display the support reactions for steel beams. They are typically created to assist connection design in steel structures.
To create an individual beam end force drawing, do the following:
Create a column splice load drawing
Column splice drawings are general arrangement drawings that also display the connection forces at steel column splices. They are typically created to assist connection design in steel structures.
To create an individual column splice drawing, do the following:
Create a foundation reaction drawing
Foundation reaction drawings are general arrangement drawings that also contain support reactions in order to assist foundation design.
To create an individual foundation reaction drawing, do the following:
Create a loading plan drawing
Loading plan drawings are general arrangement drawings that also contain applied loads for the selected loadcase.
To create an individual loading plan drawing, do the following: