Skip to main content

Filter reports

Modified: 2 May 2025 Tekla Structural Designer 2026
2026
Tekla Structural Designer

Tekla Structural Designer provides filters for selective report output:

  • Model filters apply to model reports based on selections like levels, frames, planes, groups, members, trusses, portal frames, and UDAs.

  • Loading filters apply to both model and member reports based on loadcases, combinations, and envelopes.

Create filters

  1. In the Filters group of the Report ribbon, select the desired filter type.

    The Edit filters dialog box opens.

  2. Click Add.
  3. Type a name for the new filter.
  4. In the Selected items list, select the necessary options to define the filter requirements.
  5. Click OK.

    Tekla Structural Designer creates the filter. You can now apply the filter to a specific report.

    Tip:

    If you create a member filter, you can later review and modify it graphically by clicking Report Filter on the Review ribbon.

Apply filters

Note:

If a filter type is not applicable for the selected chapter, it will be unavailable.

  1. On the Report ribbon, click either Model Report... or Member Report...

    The Report Contents dialog box opens.

  2. Select the report that you want to filter.

    In the right column, any chapters that can be filtered are displayed in blue text.

  3. Right-click a chapter.
  4. In the context menu, select the desired filter type and filter name.
    Tip:
    If you cannot find an appropriate filter, do the following:
    1. In the context menu, go to the filter type and click Edit\New...
    2. In the Select filter dialog box, click Add.
    3. Type the name of the filter in the Active filter field.
    4. In the Selected items list, select the necessary options to define the filter requirements.
    5. Click OK.
  5. Click OK.

    Tekla Structural Designer applies the filter to the selected report chapter.

Submit

Table of Contents