Tapered column (S99) creates a single built-up column, which can be straight or tapered.
Parts created
-
Vertical web plate
-
Vertical outside flange plate
-
Inclined inside flange plate
-
Top plate
-
Flange stiffeners (2)
-
Horizontal stiffeners (2)
Use for
| Situation | More information |
|---|---|
|
|
A tapered built-up column with a stiffened corner. Flange stiffeners:
|
|
|
A straight built-up column. |
Before you start
Ensure that you have a point to pick.
Picking order
-
Pick a point to indicate the location of column:
Picture tab
Use the Picture tab to define the column dimensions.
|
Field |
Description |
|---|---|
|
1 |
Extra length for top plate. |
|
2 |
Extra length for outer flange. |
|
3 |
Length of horizontal stiffener. |
|
4 |
Top level of horizontal stiffener. |
|
5 |
Bottom level of column. |
|
6 |
Roof slope as a percentage, for example 10. |
|
7 |
Distance from the top corner to the top of the stiffener. |
|
8 |
Distance from the top of the stiffener to the inner corner of the web plate. |
|
9 |
Web plate width at bottom. |
Parts tab
Use the Parts tab to define the plate properties.
|
Option |
Description |
Default |
|---|---|---|
|
t b h |
Define the thickness, width, and height of the part. |
|
|
Pos_No |
Define a prefix and a starting number for the part position number. Enter the assembly position number on the second row. |
The default part start number is defined in the Components settings in . |
|
Material |
Define the material grade. |
The default material is defined in the Part material box in the Components settings in . |
|
Name |
Define a name that is shown in drawings and reports. |
Parameters tab
Use the Parameters tab to define the plate size, distances and other properties.
|
Field |
Description |
|---|---|
|
Outer flange profile |
Profile size of plates. The file std_flange_plates.dat defines the available plate profiles. |
|
Inner flange profile |
|
|
Top plate profile |
|
|
Horizontal stiffener profile |
|
|
Outer flange splice distance |
If the plate is longer than the maximum plate length (defined in std_flange_plates.dat), Tekla Structures creates a splice. |
|
Inner flange splice distance |
|
|
Horizontal stiffener chamfer |
Dimension of internal chamfer in horizontal stiffener. (Default is 15.) |
|
Orientation |
Rotates the column web relative to the work plane. |
Welds
Click the link below to find out more: