Use the fields at the bottom of the Picture tab pages to create bolts in each bolt group, use the fields at the bottom of the Picture tab page(s):
|
Bolt group |
Tab |
|---|---|
|
Connects all parts |
Picture |
|
Connects first and second brace picked to the tower leg |
Picture 2 |
-
Enter 0 to create a bolt on the intersection of gage lines
-
Enter 1 or more to move the bolt along the gage line, away from the end of the brace, on either the first or second diagonal brace picked:
| Description | |
|---|---|
| 1 |
First brace picked |
| 2 |
Second brace picked (component 89 only) |
| 3 |
Creates bolt at intersection of gage lines |
| 4 |
Moves bolt 30 mm along the gage line, away from the end of the brace |
To move a bolt towards the edge of the brace, enter a negative number, e.g. -10.