Default values for all the properties in the Parameters tab, except clearance, plus the bolt end distances of the diagonals can be specified in text files called tower_joint_clearance_N.txt, where N is the bolt diameter. For example, tower_joint_clearance_16.txt, tower_joint_clearance_24.txt, etc.
This file can be created in the current model folder or system folder.
If the text file for a particular bolt diameter is not found, the connection will calculate its own default values.
The format of this text file is:
Format 1: <L-profile> <C> <D1> <D2> <D3> <D4> <E> | <C> <D1> <D2> <D3> <D4> <E>
Format 2: <L-profile> <C> <D1> <D2> <D3> <D4> <E>
Format 3: <L-profile> <H> | <B>
Format 4: <L-profile> <H>
Where
-
<L-profile> = L-profile name; eg, L200*200*20, L200/15.
-
<C> = distance from the edge of the part to the nearest bolt.
-
<D1> = distance from the heel of the part.
-
<D2> = distance from the outside-border of the part.
-
<D3> = distance from the heel of the part, away from the part.
-
<D4> = distance from the cut-end of the part, if any.
-
<E> = distance between bolts.
-
<H> = see the section below on Format 3 & 4.
-
<B> = see the section below on Format 3 & 4.
-
The first set of values in Format 1 is for the first flange (h) of the part, and the second set for the second flange (b).
-
In Format 2, h and b have the same values.
-
In Format 3, the first set of <C> <D1> ... <D4> <E> values are assigned with the value of <H>, and the second assigned with <B>.
-
In Format 4, both sets of values are assigned with the value of <H>.
Note that
-
Lines starting with a ';' or ' ' are skipped.
-
<L-profile> must start on the first position of the line.
-
There must be at least one blank space between <L-profile> and the first value.
-
The component finds only the first occurrence of the specified L-profile.
Examples
L40*5 20
L50*50*5 25 | 25
L80*10 30 30 30 30 30 30
L200/15 40 45 40 40 40 35
L200/20 40 45 40 40 40 35
RSA45*45*5 20 25 20 20 20 20
RSA100*100*8 30 45 40 40 40 35
RSA75*150*15 30 35 30 30 30 25 | 35 40 35 35 35 30
RSA150*75*15 35 40 35 35 35 30 | 30 35 30 30 30 25
RSA200*200*20 40 45 40 40 40 35