You can define bolt mark options independently for site and shop bolts.
Below is a list of the elements specific to bolt marks.
For additional information about defining size in bolt marks, see Define size in bolt marks using advanced options.
|
Element |
Description |
|---|---|
|
Bolt length |
Adds the length of the bolt. You can change the unit and format of the length. |
|
Bolt diameter |
Adds the bolt diameter. You can change the unit and format of the diameter. |
|
Hole diameter |
Adds the hole diameter. You can change the unit and format of the diameter. |
| Hole depth | Adds the bolt hole depth. |
|
Material |
Adds the bolt material grade. |
|
Standard |
Adds the bolt standard. |
|
Short name |
Adds the bolt’s short name. This can be the commercial name of a specific bolt, for example. |
|
Full name |
Adds the complete name of the bolt. This name is visible in the dialog box list. |
|
Assembly type |
Adds the bolt assembly type. |
|
Number of bolts |
Adds the quantity of bolts. |
|
Slot length (x) Slot length (y) |
Adds the slot length in the x or y direction. You can change the unit and format of the length. |
|
Slot length |
Adds the slot length. You can change the unit and format of the length. |
|
Slot height |
Adds the slot height. You can change the unit and format of the height. |
|
Size |
Adds the hole size. You can change the unit and format of the size. |
|
Countersunk |
Adds countersink in the countersunk bolt marks. |
|
Gage of outstanding leg |
Adds hole gage. You can control the format of this element with the advanced option
|
|
Center-to-center distance |
Adds center-to-center distance. You can control the format of this element with the advanced options
|