Use the Bending schedule fields in Rebar shape manager to define the content for templates and reports. Each of the Bending schedule fields cells can contain a shape property or a formula.
When you right-click in a Bending schedule fields cell, you can:
- Select a shape property from the list. The content of the list depends on the reinforcing bar geometry.
- Select the (empty) option to clear the content of the current cell.
- Select the
(formula) option to enter a formula. The variables in the
formula can either be the shape properties visible in the pop-up menu, or direct
references to other non-empty bending schedule field cells.
You can use the following functions in the formulas, in the same way as in custom components:
- Mathematical functions
- Statistical functions
- Trigonometric
functions
When you map angles and trigonometric functions in the Schedule field formula dialog box, enter the functions (sin, cos, tan) in small letters, for example sin(A1). Capital letters are not recognized, and a blank space will appear in reports.
If you have angles in a formula, the formula needs to be in radians. For example, if you want to subtract 180 degrees from angle A1, enter A1-PI in capital letters. If you enter A1-180 or A1-pi, the formula does not work.
Bending schedule fields cell shows the result of a valid formula. If the formula is not valid, a question mark and text describing the error is shown.
Use the fields S, T, U or V to report angles. If you do not use these fields, you need to override the default unit settings in the Template Editor.
Example
Formula is L1+L3+L5-2*DIA
-
L1, L3 and L5 are the leg lengths measured from outer edge to outer edge
-
H1 is the total width
-
to achieve H1: L1+L3+L5 minus 2*bar diameter