Skip to main content

XS_BOLT_DUPLICATE_TOLERANCE

Tekla Structures 2021
2021
Tekla Structures

Category: Numbering

When XS_​BOLT_​DUPLICATE_​IGNORE is set to TRUE, use XS_BOLT_DUPLICATE_TOLERANCE to set the location tolerance that defines which bolt holes are considered duplicates and will therefore be ignored in part numbering.

The default value for the tolerance is 3 mm.

Note:

It is not recommended to change this advanced option during a project, but if you do so, you must carry out full numbering.

This advanced option is model specific and the setting is saved in the options database.

Submit

Table of Contents