Skip to main content

Placement properties for marks, notes, dimensions, texts and symbols in drawings

Modified: 4 Oct 2023 Tekla Structures 2023
2023
Tekla Structures

Use the placing settings for annotation objects (dimensions, marks, notes, texts, and symbols) to control how the objects are placed in a drawing.

You can set automatic placing properties for dimensions and marks before you create a drawing. In an open drawing, you can define placing properties for annotation objects that you create manually, and modify the placing properties of the annotation objects that you already have in your drawing.

  • In the property pane, select an annotation object in the object list. The placing properties are located in the Placing section of the annotation object properties.
  • On the drawing and view level, open the annotation object properties first and then click the Place... button.

Setting

Description

Placing section in property pane or Part mark placing properties on the drawing and view level
Short dimensions

Define the text location of short dimensions:

: Text is inside the dimension lines.

: Text is outside the dimension line.

Dimension line spacing

Define the space between parallel dimension lines.

In manually created dimensions, this setting works only if dimension Placing is set to Free.

Alignment

Select where you want to align the mark, text, or note:

Left

Center

Right

Leader line

The Leader line option is available in following mark types: bolt marks, connection marks, part marks, neighbor part marks, pour object marks, reinforcement marks, neighbor reinforcement marks, merged reinforcement marks and surface treatment marks.

Rotation

Define the mark rotation.

Placing method

Free allowsTekla Structures to search for the first suitable location for the annotation object. This also affects the direction of the dimensions.

Fixed allows you to place the annotation object in any location.

When you use the option Fixed, the annotation object stays where it is even though you update the drawing, whereas with Free, Tekla Structures tries to find the optimal place for the annotation object.

Negative direction, Positive direction

Direction (drawing and object level)

Define the side of the dimensioned object on which Tekla Structures places the dimensions.

This setting affects the free setting.

This setting is not available in GA drawing dimension properties.

Distance s (property pane)

Search margin (drawing and view level)

Define the empty margin that you want to have around the the annotation objects.

Note that if you use a high Search margin value, the mark placement does not work properly.

Distance d min (property pane)

Minimum distance (drawing and view level)

Define the minimum distance of the annotation object from the part.

Note that if you specify a high value, the annotation object placement does not work properly.

Distance d max (property pane)

Maximum distance (drawing and view level)

Define the maximum distance of the annotation object from the part.

Position (Quarter on the drawing and view level )

Define the areas where Tekla Structures searches for a position to place the annotation object.

This setting is available for marks, notes, and texts.

Weld placement depends on the welding direction. Welds can only be placed in certain sectors, so this setting is not available for model weld marks. However, this option is available for manually added weld marks in the final drawing.

The following image illustrates the Distance s (Search margin), Distance d min (Minimum distance ), and Distance d max (Maximum distance) of a mark:

(1) Distance s

(2) Distance d min

(3) Distance d max

Submit

Table of Contents