Skip to main content

XS_BOLT_MARK_STRING_FOR_SIZE

Modified: 21 Sep 2023 Tekla Structures 2023
2023
Tekla Structures

Category in Advanced options dialog box

Marking: bolts

Use to define the contents of the Size element in bolt marks. For example, to have the bolt number and the hole diameter in the mark, enter %BOLT_NUMBER%*D%HOLE.DIAMETER%.

This advanced option is only used when there is a bolt and the hole is a normal one.

The advanced options XS_SHOP_BOLT_MARK_STRING_FOR_SIZE and XS_SITE_BOLT_MARK_STRING_FOR_SIZE override this setting.

You can use any combination of text and the following options as the value for this advanced option. You can use the options in any order, and make calculations.

  • BOLT_NUMBER

  • DIAMETER

  • LENGTH

  • HOLE.DIAMETER

  • LONG_HOLE_X

  • LONG_HOLE_Y

  • LONGHOLE_MIN (the shorter of the slotted hole dimensions)

  • LONGHOLE_MAX (the longer of the slotted hole dimensions)

  • BOLT_STANDARD

  • BOLT_MATERIAL

  • BOLT_ASSEMBLY_TYPE

  • BOLT_COUNTERSUNK

  • BOLT_SHORT_NAME

  • BOLT_FULL_NAME

Enclose each option in % characters.

Note that if you are defining this advanced option in an .ini file, use double percent signs around the options. For example, %%BOLT_NUMBER%%*D%%HOLE.DIAMETER%%.

To use special characters, enter a backslash (\) followed by an ASCII number.

With length-type options, but not in calculations, you can specify the number of decimals. For example, HOLE.DIAMETER.2 shows (tapped) hole diameters with two decimals.

This advanced option is model specific and the setting is saved in the options database.

See also

XS_​SITE_​BOLT_​MARK_​STRING_​FOR_​SIZE

XS_​SHOP_​BOLT_​MARK_​STRING_​FOR_​SIZE

Define size in bolt marks using advanced options

Submit

Table of Contents