In an open drawing, you can add connection marks for the selected connections manually. You can also modify the manually or automatically added connection marks, and delete any unnecessary marks.
We recommend that you use Drawing content manager for selecting the connections, otherwise you might end up selecting parts instead of connections.
Connections are represented by connection symbols in drawings. By default, the connection representation symbol is the symbol number 142 in the xsteel.sym file in the ..\ProgramData\Trimble\Tekla Structures\<version>\environments\common\symbols\ folder. You can modify the connection representation symbol in Symbol Editor. Connection symbols are only shown in a drawing when you have selected the connections from the Drawing content manager list, otherwise connection symbols are hidden.
A connection that has been selected in a drawing:

You can create connection marks automatically by defining them in the drawing or view level properties.
Add connection marks
Modify connection marks
Delete unnecessary connection marks
- In Drawing content manager, activate the mark selection
at the top and select the
connections in the list whose marks you want to delete. Then press
Delete on the keyboard, or right-click in the drawing
and select Delete.
at the top of 
in the upper-right
corner of the element. You can also click the element, and press