This example shows how to assign control numbers to six concrete walls. As four of these walls have the same cast unit position, you cannot make a clear distinction between the cast units based on their position number. That is why each wall will get a unique identifier that indicates their erection order at the site. The erection order also affects the order of shipping. For example, the wall number 1 needs to be shipped on top of the delivery, because it will be erected first on the site; the wall number 2 should be the second on the bundle, because it will be erected next; and so on.
The following image represents the desired end result.
(1) Erected as 1st
(2) Erected as 2nd
(3) Erected as 3rd
(4) Erected as 4th
(5) Erected as 5th
(6) Erected as 6th
To assign control numbers to the concrete walls:
-
On the
Drawings & reports tab, click
to open the
Create control numbers dialog.
-
Select the six concrete walls.
-
Define that you want to assign control numbers only to parts in the numbering series S with the start number 1.
-
In the
Numbering list, select
By numbering serie.
-
In the
Prefix box, enter
S.
-
In the
Start number box, enter
1.
-
Define that you want to use the numbers 1–6 as the control numbers for these concrete walls.
-
In the
Start number of control numbers box, enter
1.
-
In the
Step value box, enter
1.
-
Define that you want to first number the walls with identical z coordinates in the order they appear in the positive x axis.
-
In the
First direction list, select
Z.
-
In the
Second direction list, select
X.
-
Click
Apply to save the changes.
-
Click
Create to number the concrete walls.
Each concrete wall gets a unique control number, as shown in the following image.