Skip to main content

Create a layout line

Modified: 11 Jun 2026 Tekla Structures 2025
2025
Tekla Structures

Use the Layout line tool to create layout lines. Layout lines are created between layout points.

Before you start:

  • Create layout points in your model.

  • Ensure that the Select components selection switch is activated.

  1. On the Manage tab, click Layout manager.
  2. Click the Layout line button.

    Tekla Structures opens the Layout line dialog and the Applications & components catalog in the side pane.

  3. In the Layout line dialog, define the properties of the layout line:
    Option Description

    Name

    Name of the layout line

    If you do not enter a name, Layout manager adds a number as the name.

    Description

    Description of the layout line

    Size

    Diameter of the layout line

    Layout manager uses the XS_IMPERIAL advanced option to determine the units. Set XS_IMPERIAL to TRUE to use imperial units.

    Class

    Class of the layout line

    Part name

    Name for the part that the Layout line tool creates in the model.

    Group Name

    Select a group from the Group Name list or create a new group by entering a name.

    These groups are the groups that are listed in Layout manager.

    Is Field Line

    For an imported line, Is Field Line shows if a line is a field line that has been measured on the construction site and imported to Tekla Structures.

    The property is not available for the lines that you are defining in the model.

    Part numbering

    Part prefix and start number for the part position number

    Assembly numberingg

    Assembly prefix and start number for the assembly position number

  4. Click Apply.
  5. Select the first layout point.
  6. Select the second layout point.

    The start point and the end point cannot be in the same location.

    The layout line is created, and it is added to the group that you selected in the Layout line dialog. To close the dialog, click OK.

Tip:

You can also add a layout line to a group in Layout manager. Select the line in the model, then right-click the group and select Add selected.

Tip:

To zoom to a layout line in the model, right-click the line in Layout manager and select Zoom selected.

You can highlight a layout line that you have selected in the model in Layout manager. First select a line in the model, then in Layout manager, click Highlight > Highlight selected model point. Select Redraw to remove the highlighting.

Submit

Table of Contents