Category in Advanced options dialog: Numbering
Use this advanced option to define the contents of the part position number.
If this advanced option is set, it overrides the Position number separator setting in .
The advanced options XS_ASSEMBLY_POSITION_NUMBER_FORMAT_STRING and XS_PART_POSITION_NUMBER_FORMAT_STRING override the advanced option
XS_SWITCH_POS_NUMBERS_FOR. XS_SWITCH_POS_NUMBERS_FOR has no impact on assembly and/or part
position numbers if you use XS_ASSEMBLY_POSITION_NUMBER_FORMAT_STRING and/or XS_PART_POSITION_NUMBER_FORMAT_STRING.
Enter any combination of the following options:
|
Option |
Description |
|---|---|
|
|
Part prefix, defined in the part properties in the property pane. |
|
|
Part position number, defined by the start number (from part properties in the property pane) and the final position in that numbering series. |
|
|
Same as above, but with letters. Uses letters A – Z by default, but you can also define valid letters with the advanced option
|
The position number/ letter switch can also include a suffix defining the minimum number of digits (or letters), for example:
%PART_POS.3%. This example results in a first part number of 001, second 002 etc.
This advanced option is model specific and the setting is saved in the options database. Reopen the model to activate the new value.