Skip to main content

Example of a variable formula: Change the end plate material

Modified: 3 Nov 2025 Tekla Structures 2026
2026
Tekla Structures

This example shows how to link a parametric variable to the end plate material of a component object so that you change the material if needed.

  1. In the model, select the custom component, right-click, and then select Edit custom component.
  2. On the Custom component editor toolbar, click the Display variables button.

    The Variables dialog opens.

  3. To create a new parametric variable, click Add.
  4. Modify the parametric variable as follows:
    1. From the Value type list, select Material.
    2. In the Label in dialog box box, enter End plate material.

  5. Link the parametric variable to the Material property of the end plate.
    1. In the Custom component browser, browse for the Material property of the end plate.
    2. Right-click Material and select Add equation.
    3. Enter P1 after the equal sign, and then press Enter.

  6. Save the custom component.
  7. Close the custom component editor.
  8. Select the custom component in the model, and open the custom component dialog.

    The option to change the end plate material is in the custom component's dialog.

  9. To change the material, click the … button next to the name box.
  10. Select the material from material catalog, and in the custom component dialog click Modify.

    Tekla Structures changes the end plate material in the custom component.

Submit

Table of Contents