Skip to main content

Generation of profiles (9)

Modified: 14 Nov 2024 Tekla Structures 2026
2026
Tekla Structures

Generation of profiles (9) creates cladding profiles for walls and ceilings.

Objects created

  • Steel beam profiles

Use for

Situation Description

Steel beam profile

Selection order

  1. Pick the start point for the cladding panel.

  2. Pick a point to indicate the x direction.

    This dimension also defines the width of the panel if you have selected the Ltot/# option for Type division in X on the Parameters tab.

  3. Pick a point to indicate the y direction.

    This dimension also defines the height of the panel if you have selected the Ltot/# option for Type division in Y on the Parameters tab.

    The panel is created automatically when you pick the point for the y direction.

Picture tab

The Picture tab shows an example of cladding profiles.

Parts tab

Use the Parts tab to define the part properties.

Parts

Option Description

Profile

Select the profile from the profile catalog.

Option

Description

Default

Pos_No

Prefix and start number for the part position number.

Some components have a second row of fields where you can enter the assembly position number.

The default part start number is defined in the Components settings in File menu > Settings > Options.

Material

Material grade.

The default material is defined in the Part material box in the Components settings in File menu > Settings > Options.

Name

Name that is shown in drawings and reports.

Class

Part class number.

Create profiles in span

Option Description

Yes

All profiles are created.

No

No profiles are created.

Yes - 1ste

All profiles, except the profile closest to the origin, are created.

Yes - last

All profiles, except the last profile, are created.

Yes- firstlast

All profiles, except the first and last profile, are created.

First

The profile closest to the origin is created.

Last

The profile farthest away from the origin is created.

Creation direction

Define whether the profiles are continuous or individual, and single or twin. You can also use this setting to rotate asymmetrical profiles, such as angles, by switching the creation direction.

Option Description

Select from the following options:

  • Separate profiles are created from left to right in each span.

  • One continuous profile is created from left to right.

  • Separate profiles are created from right to left in each span.

  • One continuous profile is created from right to left.

  • Separate twin profiles are created in each span.

  • Continuous twin profiles that extend over all spans are created.

End offset

Option Description

Move end 1/2

Set the start and end offset.

Move 1 is the start offset and Move 2 is the end offset.

Part position

Option Description

Position in plane

Define the part position on the work plane.

Rotation

Define the rotation of the part around its axis on the work plane.

Position in depth

Define the position depth of the part.

Parameters tab

Use the Parameters tab to define the number and placement of profiles.

Profiles

Option Description

Number of profiles

Define the number of profiles created in the x and y direction.

Distance between the profiles

Define the distance between the profiles in the x and y direction.

Type division in X

Type division in Y

  • Ltot/#: The area created by picking points at the start of the component is divided by the number of profiles. This value is used as distance between profiles.

  • #xD: The number of profiles and distances between profiles defined in the component dialog are used, and the area picked at the start is ignored.

Global displacement

The offsets you define here are added the picked points in the model coordinate system.

Combine

Select whether the profiles are created in the x, y, or both directions.

Finish

Enter the Finish property to be used.

Comment

Enter the needed additional information.

Fabricator name

Enter the fabricator name.

Prof.// X_m / Prof.//Y_m tabs

Use the Profile tabs to define the profile properties in the x and y direction.

Profiles

Option Description

Profile

Select the profile from the profile catalog.

Option

Description

Default

Pos_No

Prefix and start number for the part position number.

Some components have a second row of fields where you can enter the assembly position number.

The default part start number is defined in the Components settings in File menu > Settings > Options.

Material

Material grade.

The default material is defined in the Part material box in the Components settings in File menu > Settings > Options.

Name

Name that is shown in drawings and reports.

Opton Description

In plane

Part position on the work plane.

Rotation

Rotation of the part around its axis.

In depth

Position depth of the part.

Prop._m tab

Use the Properties tab to define the finish, comment, and fabricator for the parts, and the start and end offsets.

Properties

Option Description

Finish

Enter the Finish property to be used.

Comment

Enter the needed additional information.

Fabricator

Enter the fabricator name.

Class

Enter a class for the part.

Move end 1/2

The first box is the start offset of the first beam.

The second box is the end offset of the first beam and also the start offset of the second beam (and any other beam until the last beam).

The third box is the end offset of the second beam (and any other beam until the last beam) and also the start offset of the last beam.

The fourth box is the end offset of the last beam.

Submit

Table of Contents