You can create chamfers
between two lines using a distance or radius that you specify. You can create both straight
and round chamfers.
-
Select two intersecting lines.
-
Do one of the
following:
-
To create a straight chamfer, on the
Sketching tab, click
Straight
chamfer.
Enter the distance that you want to have between the two lines (the length of the chamfer line) in the displayed dialog.
-
To create a round chamfer, on the
Sketching tab, click
Round
chamfer.
Enter the desired radius in the displayed dialog.
Example
Example of a straight chamfer:
Example of a round chamfer: